Shiftworks Logo










 
 
 
 
 

 

 
 

1968-81 Corvette

Click on image for larger view

Shifter Conversion Kit

Use your factory-installed shifter with a newer TH200-4R, TH700-R4, or 4L60 & 4L80 overdrive transmission. This conversion kit includes a new laser cut and hardened detent, all the hardware and brackets needed for use of the original cable, and an overdrive console lens adapter.

GM Retainer
Clips cable to pin on shifter handle.
# S532 . . . $5.50


GM Retainer Clip
1968-71

#SC2401 . .$97.25

#SC2401
1972-76

#SC2402 . .$97.25

SC2402
1977-81

#SC2403 . .$97.25

 

#SC2403

1968- 81

Neutral safety switch can be used with overdrive conversion. Properly locates Park, Reverse lights and Neutral starting. Adjustment is as shown. Original mounting holes can be used. Switch does NOT HAVE a plug on the wire ends.

#S522-CVT . . . .$42.75

     

Click for larger image

1968- 81

29 inch Shifter Cable *
#K102 . . . .$94.50 

     

Click for larger image

* This new SHIFTWORKS® replacement cable for GM Cable #3958079 is used for the 1968-76 Corvette and for the GM Cable #357746 used for the 1977-81 Corvette. This cable can be used for all TH350's and TH400's and can also be used in all SHIFTWORKS® Overdrive Conversions.

The SHIFTWORKS® cable has more flexibility with a bend radius of 3 inches, a load rating of 60 lbs. of push and 110 lbs. of pull, adjustable bulkhead connectors, stainless cable, non-booted modern dry sweep design, and is easier to install as a result. This cable has 2 1/2 inches of travel. The cable is 29 inches eyelet to eyelet and the color is black. Made in the U.S.A.

1968-82 Corvette

click for larger image

Shiftworks new Shifter

TH350, TH400, TH200-4r, TH700-R-4, 4L60, 4L65, 4L80

Our shifter is designed to function like and look like a factory shifter. It is NOT designed as an exact replacement for the original shifter. The floor will need to be modified. It works with all TH GM transmissions. It includes all mounting hardware, transmission control hardware and a fully functional Neutral Safety/Backup Light Switch. Cable sold separately.

 

#SW280-C01      6 Inch Handle w/Black knob . . . . . . $285.00

 

1968- 81

29 inch Shifter Cable *
#K102 . . . .$94.50 

 

Click for larger image

* This new SHIFTWORKS® replacement cable for GM Cable #3958079 is used for the 1968-76 Corvette and for the GM Cable #357746 used for the 1977-81 Corvette. This cable can be used for all TH350's and TH400's and can also be used in all SHIFTWORKS® Overdrive Conversions.

The SHIFTWORKS® cable has more flexibility with a bend radius of 3 inches, a load rating of 60 lbs. of push and 110 lbs. of pull, adjustable bulkhead connectors, stainless cable, non-booted modern dry sweep design, and is easier to install as a result. This cable has 2 1/2 inches of travel. The cable is 29 inches eyelet to eyelet and the color is black. Made in the U.S.A.


Have a question?
Get Answers at FAQ
 

 

Home
FAQ's
Trans-Stormer Automatic Transmission Shifter 
  Shifter Conversion Kits   Gauges  In-dash Tachs
OverDrive VSS/Mechanical Speedo Tail Housings
  Dealers   Articles   Order   Gear   Catalog

About Us    Contact Us

.




4005 West Reno Ave.
Unit E
Las Vegas, NV 89118
PH: 702-895-6812
FAX 702-891-0675

 

information@shiftworks.com
  Copyright 1997-

Shiftworks Inc.
All rights reserved


This page designed and maintained by 

Word Works

  Please report any problems
to Word Works